 |
 |
 |
 |
 |
 |
 |
 |
| TYPICAL PHYSICAL PROPERTIES | ||||||
EZ-Dri Plush |
EZ-Dri S |
EZ-Dri M |
EZ-Dri F |
EZ-Dri XF |
EZ-Dri UF |
|
| Property: | (Plush) | (Soft) | (Medium) | (Firm) | (Extra Firm) | (Ultra Firm) |
| Pore Size (ppi) | 25 +/- 5 | 25 +/- 5 | 25 +/- 5 | 25 +/- 5 | 25 +/- 5 | 25 +/- 5 |
| Density (lbs/cu.ft.) | 1.8 +/- 0.10 | 1.8 +/- 0.10 | 1.8 +/- 0.10 | 1.8 +/- 0.10 | 1.8 +/- 0.10 | 1.85 +/- 0.10 |
| 25% IFD (lbs) | 18.5 +/- 6.5 | 25 +/- 5 | 35 +/- 5 | 50 +/- 6 | 75 +/- 6 | 100 min. |
| Comfort Factor (65%/25% IFD ratio) | NA | 1.8 nominal | 1.8 nominal | 1.8 nominal | 1.8 nominal | 1.8 nominal |
| TensileStrength (lbs./in.) | 10lb/in2, min. | 10lb/in2, min. | 10lb/in2, min. | 12lb/in2, min. | 15lb/in2, min. | 15lb/in2, min. |
| Elongation at break (%) | 150% min. | 150% min. | 150% min. | 150% min. | 100% min. | 80% min. |
| Tear Strength (lbs./in.) | 3.0 lb/in., min. | 3.0 lb/in., min. | 4.0 lb/in., min. | 4.0 lb/in., min. | 4.0 lb/in., min. | 4.0 lb/in., min. |
| Compression Set @ 50% deflection (%) | 25% loss, max. | 15% loss, max | 25% loss, max. | 25% loss, max. | 25% loss, max. | 25% loss, max. |
* Also available in 1.5 and 1.2 density.
* EZ-Dri products are now available with flame retardants meeting California 117 Certifications.
EZ-Care Instructions
- Open cushion cover and remove foam
- Rinse thoroughly with fresh water (and mild detergent if desired); rinse afterwards
- Allow to drain
- Reinstall cushion in cover
